Universal sound decoder suitable for analog / digital / SUSI + LGB® OnBoard
With powerful 3Watt power amplifier.
eMOTION S the little sound decoder.
The eMOTION S sound decoder has the same sound functions as the XLS.
ANALOGUE AND DIGITAL OPERATION GUARANTEED
The sound functions are available from just a few volts.
In analogue mode, the eMOTION S works reliably from 5 volts.
NMRA DCC and LGB® MZS
The eMOTION S fully supports the NMRA DCC protocol. Due to the automatic detection for LGB® MZS systems, the eMOTION S sound decoder is also suitable for all generations of the LGB® MZS multi-pull control system.
The decoder interface can also be used alternatively with Massoth/LGB® OnBoard or SUSI protocol.
ORIGINAL SOUND in digital quality
The eMOTION S sound decoder reproduces the authentic sounds of a locomotive in high-quality digital quality. For this purpose, sound recordings are made directly on the model and then adjusted in the sound laboratory for the electronics. The eMOTION S sound decoders have a total playback time of up to 2 minutes. This enormous storage volume is sufficient to provide the sound decoder with various additional sounds in high quality. A powerful 3 watt power amplifier is used to output the sound.
The volume of all 16 sounds can be adjusted independently.
State-of-the-art technology and the latest procedures allow new software to be loaded directly via the programming track. This guarantees updateability for the future without various generations of programming devices and also ensures the programmability of new and future sound decoder generations.
We would like to point out once again that a sound or firmware update is only possible via our PC module (8175101)!
Here is an overview of all details:
- digital sound module
- 16kHz sound processing
- Sound memory for over 2 minutes
- Operating modes: digital, analog, SUSI, LGB® OnBoard
- Analog operation starting at 5 volts
- 3 watt output power
- Connection via user-friendly plug connection for
ext. volume control
- Additional connections provided for:
2 function outputs
2 contact inputs
- extensive selection of sounds available
- updatebar via PC module
The power supply cable (soldered on) and the SUSI connection cable are included with the S sound decoder.
It is assumed that there is a loudspeaker in the locomotive.
If this is not the case, you can order this additionally.
Here is the loudspeaker list of the individual locomotives.