{"id":3773,"date":"2019-11-20T14:01:49","date_gmt":"2019-11-20T13:01:49","guid":{"rendered":"https:\/\/www.massoth24.de\/?p=3773"},"modified":"2019-11-20T14:01:49","modified_gmt":"2019-11-20T13:01:49","slug":"infrarot-pzb-halt-im-eingleisigen-bahnhof","status":"publish","type":"post","link":"https:\/\/www.massoth.de\/en\/infrarot-pzb-halt-im-eingleisigen-bahnhof\/","title":{"rendered":"Infrared: Stop in a single track station"},"content":{"rendered":"

<\/p>\n

Stop in a single siding\u00a0track<\/u><\/h3>\n

As an example for a train stop in a single siding track or station.
\nAdditionally on pull in or out the bell will start from the decoder<\/p>\n

Note: In this example we use a signal, that doesn\u2019t exist.
\nYou don\u2019t need a signal to use the functions!<\/p>\n

\"Nur_Halt_ohne_Signal\"<\/p>\n

Please program the IR-Sender as follows:<\/p>\n

CV 32 = 5 (Address of the signal)
\nCV 41 = 1 (Function on pass over the sender)
\nCV 42 = 3 (Command 3, typically the bell)<\/p>\n

Activate it with switch address 5 left key (on LGB switch command right button)<\/p>\n

Mount the IR-Sender as shown. Calculate a sufficient braking distance when installing the sender.<\/p>\n

Please program the IR-Receiver as follows:<\/p>\n

CV 1 = 64 (Loco address, here value 64)
\nCV 29 = x (Values must be identical to the loco!)
\nCV 31+32 = Please program here a \u201cReset Address\u201d to set the state of the signal to green.<\/p>\n

You can find additional notes here<\/a>.<\/p>\n

Connect the receiver (with SUSI) as described in the manual.
\nImportant!<\/strong> Activate in the decoder SUSI (CV 49=18)<\/p>\n

Turn with Switch Command 5 the signal to \u201cred\u201d (Left key is \u201cred\u201d in default settings)
\nWhen loco 64 is pass over the IR-sender, the loco will stop. Additionally the bell will be triggert (Depends on settings in sound data sheet)
\nIMPORTANT!<\/strong> Now turn the direction of travel on the controller!
\nIf you set now with the Switch Command 5 the signal to \u201cgreen\u201d, the loco will pull out of the station and trigger the bell.
\nThe sound will be triggered on every pull over of the IR-Sender!<\/p>\n

Single track with\u00a0signal<\/u><\/h3>\n

As an example we describe here a stop on a signal.
\nThe signal is not absolutely necessary!<\/p>\n

\"Halt_mit_Signal\"<\/p>\n

Please program the IR-Sender as follows:<\/p>\n

CV 32 = 5 (Address of the signal)<\/p>\n

Activate it with switch address 5 left key (on LGB switch command right button)<\/p>\n

Mount the IR-Sender as shown. Calculate a sufficient braking distance when installing the sender.
\nConnect the signal as described in the manual.<\/p>\n

Please program the IR-Receiver as follows:<\/p>\n

CV 1 = 64 (Loco address, here value 64)
\nCV 29 = x (Values must be identical to the loco!)
\nCV 31+32 = Please program here a \u201cReset Address\u201d to set the state of the signal to green.<\/p>\n

You can find additional notes here<\/a>.<\/p>\n

Connect the receiver (with SUSI) as described in the manual.
\nImportant!<\/strong> Activate in the decoder SUSI (CV 49=18)<\/p>\n

Turn with Switch Command 5 the signal to \u201cred\u201d (Left key is \u201cred\u201d in default settings)
\nWhen loco 64 is pass over the IR-sender, the loco will stop.
\nIf you set now with the Switch Command 5 the signal to \u201cgreen\u201d, the loco will drive on.<\/p>\n

Single track with signal and Red Light\u00a0lock<\/u><\/h3>\n

As an example a stop with a signal and the possibility to driveHier ein Beispiel mit einem Halt mit einem echten Signal and the possibility to drive in the opposite direction.<\/p>\n

\"Halt_mit_Signal_und_Rotsperre\"<\/p>\n

Please program the IR-Sender as follows:<\/p>\n

CV 32 = 5 (Address of the signal)
\nCV 50 = 128 (Activate red light lock)<\/p>\n

Activate it with switch address 5 left key (on LGB switch command right button)<\/p>\n

Mount the IR-Sender and the Red light lock as shown. Calculate a sufficient braking distance when installing the sender.
\nNote the minimum distance from IR Sender to Red light lock.
\nConnect the signal as described in the manual.<\/p>\n

Please program the IR-Receiver as follows:<\/p>\n

CV 1 = 64 (Loco address, here value 64)
\nCV 29 = x (Values must be identical to the loco!)
\nCV 31+32 = Please program here a \u201cReset Address\u201d to set the state of the signal to green.<\/p>\n

You can find additional notes here<\/a>.<\/p>\n

Connect the receiver (with SUSI) as described in the manual.
\nImportant!<\/strong> Activate in the decoder SUSI (CV 49=18)<\/p>\n

Turn with Switch Command 5 the signal to \u201cred\u201d (Left key is \u201cred\u201d in default settings)
\nWhen loco 64 is pass over the IR-sender, the loco will stop.
\nIf you set now with the Switch Command 5 the signal to \u201cgreen\u201d, the loco will drive on.
\nIf the locomotive now comes from the right, this has no effect on the locomotive.<\/p>","protected":false},"excerpt":{"rendered":"

Stop in a single siding\u00a0track As an example for a train stop in a single siding track or station. Additionally on pull in or out the bell will start from the decoder Note: In this example we use a signal, that doesn\u2019t exist. You don\u2019t need a signal to use the functions! Please program the IR-Sender as follows: CV 32 = 5 (Address of the signal) CV 41 = 1 (Function on pass over the sender) CV 42 = 3 (Command 3, typically the bell) Activate it with switch address 5 left key (on LGB switch command right button) Mount… <\/p>\n","protected":false},"author":14,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_links_to":"","_links_to_target":""},"categories":[136,139],"tags":[],"_links":{"self":[{"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/posts\/3773"}],"collection":[{"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/users\/14"}],"replies":[{"embeddable":true,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/comments?post=3773"}],"version-history":[{"count":1,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/posts\/3773\/revisions"}],"predecessor-version":[{"id":3777,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/posts\/3773\/revisions\/3777"}],"wp:attachment":[{"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/media?parent=3773"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/categories?post=3773"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.massoth.de\/en\/wp-json\/wp\/v2\/tags?post=3773"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}